Filters

List of earth wall Tenders

List of latest earth wall Tenders in Indian Tenders. Click on any earth wall Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for earth wall Tenders.

All-Tenders (54)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35936093 | 01 Dec, 2025

Tender Value : 6.79 Lacs

Dehradune - Uttaranchal

Tender for provn of six chemical earthing points in 6 mtn arty bde sig coy at raiwala mil stn and constr and installation of 55 boundary pillars on aa-1 def land outside the existing boundary wall from tcp-1 to arf raiwala along railway life and lower farm asce

State Government

TRN :35936970 | 25 Nov, 2025

Tender Value : 23.30 Lacs

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and morth specifications clauses 1700 and 2702.2 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and fillling joint sealing compound as per drawings and morth specifications with coarse sand and 6 per cent bitumen by weight clause 2604 drainage spouts complete as per drawing and morth specifications clause 2705 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and morth specification clause 801 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 800 mm x 600 mm rectangular pali to neemkhera via hanaheri km. 4/100

corporations/Associations/Others

TRN :35937040 | 27 Nov, 2025

Tender Value : 8.56 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of cement concrete road from banwari ji bugania house to k.d. sharma house, ward no 14- dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 2.0 km" construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km) providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - iii material providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and laying un-reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion pcc m-25. "raising circular brick/rr stone masonry manhole with circular opening 560mm dia and frame slab to required level including dismantling existing slab, taking out the existing ci frame & cover of manhole and raising it upto ground/ road level, refixing of frame and cover in m15 (1:2:4) concrete all around the frame, including making good the damage, form work, curing, complete as directed by engineer. (brick work / rr stone work of raising depth of manhole to be paid separately) " raising circular inspection chamber with circular cover 450mm dia and frame slab to required level including dismantling existing slab, taking out the existing ci frame & cover of inspection chamber and raising it upto ground/ road level, refixing of frame and cover in m15 (1:2:4) concrete all around the frame, including making good the damage, form work, curing, complete as directed by engineer. (brick/ concrete work of raising depth of manhole to be paid separately) "raising precast circular manhole cover and frame by taking out existing precast frame and cover, providing and fixing precast sfrc circular spacer of required height, re-fixing existing manhole cover frame and cover with cement sand mortar (1:3), including making good the damage, complete as directed by engineer. "

State Government

TRN :35937368 | 25 Nov, 2025

Tender Value : 64.70 Lacs

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and morth specifications clauses 1700 and 2702.2 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and fillling joint sealing compound as per drawings and morth specifications with coarse sand and 6 per cent bitumen by weight clause 2604 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per morth specification clause 202. rubble stone masonry in cement mortar supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). providing and fixing of dowel bars of mild steel confirming to is : 432 of specified length and diameters as per morth specification irc 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with pvc sleeve complete as per drawing, technical specification and as per direction of the engineer-in-charge. providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 600 mm x 450 mm rectangular chhabra gugor road to kadia-kotdi till daulatpur near kadia village

State Government

TRN :35937430 | 25 Nov, 2025

Tender Value : 1.14 Crore

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and morth specifications clauses 1700 and 2702.2 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and fillling joint sealing compound as per drawings and morth specifications with coarse sand and 6 per cent bitumen by weight clause 2604 drainage spouts complete as per drawing and morth specifications clause 2705 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per morth specification clause 202. rubble stone masonry in cement mortar construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3 providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). providing and fixing of dowel bars of mild steel confirming to is : 432 of specified length and diameters as per morth specification irc 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with pvc sleeve complete as per drawing, technical specification and as per direction of the engineer-in-charge. supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m long providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 800 mm x 600 mm rectangular painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and morth specification clause 801 bapacha to dhingrari via phaliya via kadiyahat km. 6/550, 9/750

State Government

TRN :35937667 | 25 Nov, 2025

Tender Value : 21.55 Lacs

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and fillling joint sealing compound as per drawings and morth specifications with coarse sand and 6 per cent bitumen by weight clause 2604 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per morth specification clause 202. rubble stone masonry in cement mortar supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 2905. 1000 mm dia painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and morth specification clause 801 excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. hard rock (requiring blasting) providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 800 mm x 600 mm rectangular kadiyanohar to gagchana via kundi km. 0/100

State Government

TRN :35937767 | 25 Nov, 2025

Tender Value : 32.80 Lacs

Baran - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and morth specifications clauses 1700 and 2702.2 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per morth specification clause 202. rubble stone masonry in cement mortar supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and morth specification clause 801 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 800 mm x 600 mm rectangular jharkheri to gopal para km. 1/800

Central Government/Public Sector

TRN :35938314 | 06 Dec, 2025

Tender Value : 9.99 Lacs

Lalitpur - Uttar Pradesh

Tender for repair/maint of ceiling, exhaust, wall mounted fans, gyser fittings and fixtures, earthing and replacement of u/s meter boxes at mil stn talbehat

State Government

TRN :35939700 | 25 Nov, 2025

Tender Value : 24.15 Lacs

Baran - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per morth specification clause 202. rubble stone masonry in cement mortar supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 2905. 1000 mm dia providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 600 mm x 450 mm rectangular excavation in soil using hydraulic excavator and tippers with disposal upto 1000 m excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per morth specification clause 301.3 interlocking concrete block pavement with m-30 grade 0.30 mtr x 0.30 mtr x 0.15 mtr edge blocks (measurements shall be made inner to inner side of edge blocks) providing and laying of interlocking m-30 grade concrete block pavements having thickness 100 mm as per drawings and as per is 15658:2006.and all materials shall conform to morth specification clause 602. with m-30 grade 0.30 mtr x 0.30 mtr x 0.15 mtr edge blocks. category 'b' : dentated only two side like i,z,t shape as per irc:sp:63-2004 chhabra chhipabarod to chawalkhedi km. 1/100

corporations/Associations/Others

TRN :35939931 | 27 Nov, 2025

Tender Value : 2.80 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of cc road from keshardev ji house to ashok meel house, ward no 14 - dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km) providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and laying un-reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion pcc m-25. raising circular inspection chamber with circular cover 450mm dia and frame slab to required level including dismantling existing slab, taking out the existing ci frame & cover of inspection chamber and raising it upto ground/ road level, refixing of frame and cover in m15 (1:2:4) concrete all around the frame, including making good the damage, form work, curing, complete as directed by engineer. (brick/ concrete work of raising depth of manhole to be paid separately) "raising precast circular manhole cover and frame by taking out existing precast frame and cover, providing and fixing precast sfrc circular spacer of required height, re-fixing existing manhole cover frame and cover with cement sand mortar (1:3), including making good the damage, complete as directed by engineer. "

Related Searched Keywords : earth wall

List of earth wall Tenders

Tender for provn of six chemical earthing points in 6 mtn arty bde sig coy at raiwala mil stn and constr and installation of 55 boundary pillars on aa-1 def land outside the existing boundary wall from tcp-1 to arf raiwala along railway life and lower farm asce

Tender for repair/maint of ceiling, exhaust, wall mounted fans, gyser fittings and fixtures, earthing and replacement of u/s meter boxes at mil stn talbehat

Get earth wall Tender Alert...

Related Searched Keywords : earth wall

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us